TDFI SERIES – ID MOUNT
Portable flange facers with internal clamping for on-site machining on flanges, valves, pumps, turbine housings and heat exchangers Ø 5.9″–173.2″ (150–4400 mm).
Because of the flat design, the TDFI Series is particularly suitable for use in locations where space is at a premium, and separate installation of the clamping device and machine unit makes for easy handling. For example, when flanged fittings are being replaced in a pipeline, the sealing surfaces of the flanges at the opposing pipe ends can both be machined using the TDFI. The clamping device can be aligned precisely within a short time by means of the simply-designed adjusting system.
The TDFI Series automatic feed incorporates both radial (X-axis) and axial (Z-axis) movement. This provides various machining options for end faces, spiral-fluted sealing surfaces, holes, landings, grooves, and chamfering.
Type | TDFI-1 | TDFI-2 | TDFI-2.5 | TDFI-3 | TDFI-4 |
---|---|---|---|---|---|
Machining Ø | 5.9″ – 24.8″ 150 – 630mm | 15.8″ – 47.2″ 400 – 1200mm | 29.9″ – 96.1″ 760 – 2440mm | 47.2″ – 129.9″ 1200 – 3300mm | 66.9″ – 173.2″ 1700 – 4400mm |
Installation Ø | 5.9″ – 18.1″ 150 – 460mm | 15.8″ – 39.4″ 400 – 1000mm | 29.9″ – 86.6″ 760 – 2200mm | 47.2″ – 118.1″ 1200 – 3000mm | 65″ – 149.6″ 1650 – 3800mm |
Machine height | 12.4″ 315mm | 14″ 350mm | 20″ 500mm | 20″ 500mm | 20″ 500mm |
Drive | electric 230/120 V, 50/60 Hz or pneumatic 6-7 bar | electric 230/120 V, 50/60 Hz or pneumatic 6-7 bar | electric 230/120 V, 50/60 Hz or pneumatic 6-7 bar | pneumatic 6-7 bar or hydraulic | pneumatic 6-7 bar or hydraulic |